 Bluetooth Module Class 2Short Range surface mount Bluetooth Module with no antenna for 3.0 V to 3.6 V voltage operation.This module is CSR BC04 Class 2 module with no antenna, an operating voltage range 3.0V – 3.6V and an operating data range of 20 – 40 m. This module is provided with Bluetooth v2.0+EDR compliant SPP firmware and can be configured using our set of AT Commands sent over UART.
|
|
Features
1. Interoperable with PDAs, Phones, PCs and Laptops
2. HCI mode, or SPP software stacks
3. Supports 7 ACL links and 3 SCO links (HCI mode firmware)
4. SPP firmware provided by default on the module
5. Bluetooth v2.0 + EDR compliant backward compatible with Bluetooth v1.2/v1.1 specification
6. Small Size 25 mm x 14.5 mm x 2.2 mm
7. Lead free RoHS compliant
8. 802.11 Coexistence
9. Low Power Consumption
10. AT Command Set provided for module configuration
11. External Antenna
12. Full Bluetooth Data rate upto 3 Mbps
13. Class 2 Radio with 25 m range in open space
2. HCI mode, or SPP software stacks
3. Supports 7 ACL links and 3 SCO links (HCI mode firmware)
4. SPP firmware provided by default on the module
5. Bluetooth v2.0 + EDR compliant backward compatible with Bluetooth v1.2/v1.1 specification
6. Small Size 25 mm x 14.5 mm x 2.2 mm
7. Lead free RoHS compliant
8. 802.11 Coexistence
9. Low Power Consumption
10. AT Command Set provided for module configuration
11. External Antenna
12. Full Bluetooth Data rate upto 3 Mbps
13. Class 2 Radio with 25 m range in open space
Benefits
1. Ideal for embedded systems
2. Excellent solution to integrate wireless connectivity to a product for short range connectivity
3. Small footprint means less PCB area
4. All the firmware and hardware design developed and owned by LM Technologies Ltd
5. Low Power
6. Robust Design
7. No Host Stack required
8. Customized SPP firmware available, since LM Technologies Ltd does in-house firmware development
9. Extensive Technical Support available
10. Support for encryption data and authentication
11. Adaptive Frequency hopping allows Co Existence with Wireless LAN without any interference
12. Low Cost Solution
13. Interoperable with PDAs, Phones, PCs and Laptops
14. RoHS compliance provides environmental benefits mainly during production and end of life stages of this product
2. Excellent solution to integrate wireless connectivity to a product for short range connectivity
3. Small footprint means less PCB area
4. All the firmware and hardware design developed and owned by LM Technologies Ltd
5. Low Power
6. Robust Design
7. No Host Stack required
8. Customized SPP firmware available, since LM Technologies Ltd does in-house firmware development
9. Extensive Technical Support available
10. Support for encryption data and authentication
11. Adaptive Frequency hopping allows Co Existence with Wireless LAN without any interference
12. Low Cost Solution
13. Interoperable with PDAs, Phones, PCs and Laptops
14. RoHS compliance provides environmental benefits mainly during production and end of life stages of this product
Application
1. Serial Communications
2. Cordless Handset
3. Digital Camera & Printer
4. Embedded Devices
5. Access Points
6. GPS, POS and Barcode Reader
7. Domestic and Industrial application
2. Cordless Handset
3. Digital Camera & Printer
4. Embedded Devices
5. Access Points
6. GPS, POS and Barcode Reader
7. Domestic and Industrial application
| LM071 Bluetooth Module Class 2 | |
|---|---|
| Manufacturer | LM Technologies Ltd |
| Chipset | CSR Bluecore 4 (BC04) |
| Power Classification | Class 2 |
| Module Type | Surface Mount |
| Bluetooth Specification | Core v2.0 + EDR backward compatible with Bluetooth v1.2/1.1 specification |
| Frequency | 2402 – 2480 MHz |
| Data Rate | Upto 3 Mbps |
| Range | 25 m in open space |
| Rx Sensitivity | -83 dBm typical |
| Antenna | External Antenna |
| Voltage operation | 3.0 – 3.6V |
| Average Current Consumption (Deep Sleep Mode) | 40 uA |
| Average Current Consumption (ACL Sniff Mode) | 2.4 mA |
| Peak Current Consumption | 58 mA |
| Power Output | +4 dBm |
| Default Firmware | v4.53 |
| Size | 25 mm x 14.5 mm x 2.2 mm |
| Bluetooth Profile | Serial Port Profile (SPP). Also offered Human Interface Device (HID) profile |
| Interface | UART, USB, PCM |
| Serial Parameters | Default 19200, 8 N 1 |
| UART lines | TxD, RxD, GND, CTS, RTS |
| Baud rates | 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2/230.4/460.8/921.6 kbps |
| Configuration | AT Command Set |
| Flash Memory | 8 MB |
| RoHS Compliant | Yes |
| LM Technologies Accessories |
|---|
| LM Technologies Related Products | |
|---|---|
 | Part No.LM072 Class 1 SMT Bluetooth SPP Module with External Antenna |
 | Part No.LM400 Class 1 Plug n Play Bluetooth SPP Module with on-board Chip Antenna |
 | Part No.LM780 Class 2 SMT Bluetooth SPP Module with on-board Chip Antenna |
 | Part No.LM410 Class 1 Plug n Play Bluetooth SPP Module with external SMA Antenna |
| LM Technologies Documentation | ||
|---|---|---|
| At Command Manual | LM071 AT Command Manual | |
| Application Schematic | LM071 Application Schematic | |
| LM Technologies Case Studies |
|---|